TEMPERATURE & ENVIRONMENT SENSORS
Environment Monitoring is an important function for facilities of all types including IT data centers, warehouses, schools, hospitals, offices, restaurants, farms, factories, zoos, museums and more. Maintaining a stable environment where equipment and/or products are housed is critical for their continued operation, protection and use. With this in mind, monitoring is typically needed on a continual basis.The 'IT & Facilities Environment Monitoring' market is arguably one of the fastest growing niches in the computer industry and yet surprisingly remains 'under the radar' of many IT and facilities managers... at least until disaster strikes.
In IT & facilities environment monitoring, there are seven primary threats that are consistently of the greatest concern. These include temperature, power, humidity, flood, smoke, air flow and room entry. Additional sensor types can be found for many purposes. The objective is to implement sensors that will meet the specific needs of your monitoring application, integrate them with an automated monitoring and alerting system and stay within the budget. AVTECH offers a variety of sensors and solutions to help you do just that.
>> Get more information about AVTECH Sensors
Digital Temperature
Digital Temperature
- Provide temperature values from in real-time -55 to 125 degrees Celsius
- Accuracy is within + / - 2 C degrees
- This is a dynamic sensor that provides temperature values every two seconds and feeds temperature data back to the Room Alert ID box for data logging
- Alerting and automatic corrective action
- This is an instant 'Plug & Play' sensor via one of the standard RJ-11 jacks on any compatible Room Alert monitor.
Types
AVTECH offers this sensor with cable lengths of 25', 50' and 100'.
Extreme High Temperature
Extreme High Temperature
-
Real-time high extreme temperature sensor.
-
Temperature range: -40 ̊– 743 ̊ F, -40 ̊– 395 ̊ C
-
Analog, 1-5 VDC
-
Sensor standardization Dn IEC 751 Class B
-
Compatible with Room Alert 32E/W, 12E & Digital Temperature & Analog Sensor
Extreme Low Temperature
Extreme Low Temperature
-
Real-time low extreme temperature sensor.
-
Temperature range: -328 ̊– 32 ̊ F, -200 ̊– 0 ̊ C
-
Analog, 1-5 VDC.
-
Sensor standardization Dn IEC 751 Class B.
-
Compatible with Room Alert 32E/W, 12E & Digital Temperature & Analog Sensor
Digital Humidity
Digital Temperature humidity
- Provides real-time temperature values from -40 to 85 degrees Celsius
- Accuracy is within + / - 2 C degrees.
- The humidity range is from 5% to 95% relative humidity (RH) non-condensing.
- Humidity accuracy is within +/- 4.5% RH at 5 to 59% RH and within +/- 6.5% RH at 60 to 95% RH.
- This is a dynamic sensor that provides temperature and humidity values every two seconds and feeds temperature and humidity in real-time data back to the Room Alert ID box for data logging
- Alerting and automatic corrective action
- This is an instant 'Plug & Play' sensor via one of the standard RJ-11 jacks on any compatible Room Alert monitor.
Types
AVTECH offers this sensor with cable lengths of 25', 50' and 100'.
Main / UPS Power
Main/UPS Power
-
Real-time main power on/off status
-
Monitors main, UPS or single phase power.
-
Max sensor cable distance up to 900', includes 25'.
-
Compatible with Room Alert 32E/W, 26E/W, 24E,12E, 11E, 7E, 4E, 3E, 3W, WiSH & WiSPR.
Power Current (Amps)
.png "Power Current (Amps)")
Corrente de potência (Amps)
-
Monitors electrical current flowing through a single-phase powered cable.
-
Monitor output: 0-10A, 0-20A & 0-50A.
-
Connects via Room Alert Analog Sensor Port or Digital Temperature & Analog Sensor.
-
Operates in 0-95% RH, non-condensing environment.
-
Low-voltage 2-wire cable connection.
-
Compatible with Room Alert 32E/W, 12E & Digital Temperature & Analog Sensor.
Active Power & Temperature
Active Power & Temperature
- Provides real-time power status of any AC powered electric device by simply strapping to any existing power cord
- The power is considered 'active' when greater than approximately 100W
- Accuracy is within + / - 2.5 watts
- This sensor provides real-time temperature values from -40° to 85° Celsius
- Accuracy is within + / - 2 C degrees.
 |
 |
|
Types
Digital Active Power sensors W/temperature 10` 25` 50` e 100`
Digital Active Power sensors W/temperature 10` 25` 50` e 100`
Flood / Water Cable
Flood/Water Cable
-
Used to extend an existing Flood Sensor Cable configuration.
-
This extension is attached inline between the leader cable and the existing water detection cable.
-
This Flood Cable Extension requires a Flood Sensor with a 50' Flood Sensor Cable and leader cable.
-
The Flood Sensor Cable can be further extended by adding one or more additional 50' Flood Cable Extensions.
Flood / Water Spot
Flood /Water Spot
-
Provide real-time recognition of flood or water and includes specially designed electronics that allow it to interface with Room Alert products as a switch sensor.
-
Powered by a 9v Alkaline battery
-
This model triggers an alert if the sensor is activated.
-
This is an instant 'Plug & Play' sensor via one of the switch sensor channels on the back of the any compatible Room Alert ID box.
-
Cable distance can be extended from the standard 25' to approximately 900' by using standard speaker wire, twisted pair or any reliable low voltage 2-wire cable.
Smoke / Fire
Smoke/fire
-
Provide real-time recognition of smoke or fire and includes specially designed electronics that allow it to interface with Room Alert products as a switch sensor.
-
Powered by one 9V Alkaline battery
-
Have a bright 'escape' light and loud 'buzzer' that are triggered if the sensor is activated
-
This is an instant 'Plug & Play' sensor via one of the switch sensor channels on the back of any compatible Room Alert ID box
-
Cable distance can be extended from the standard 25' to approximately 900' by using standard speaker wire, twisted pair or any reliable low voltage 2-wire cable.
Motion
Motion
-
Movement sensing device specially equipped with additional electronics that allow it to interface with any compatible Room Alert ID box
-
The motion sensor is powered by a 12V DC power supply and is designed to detect movement up to 35' away with a cone coverage of approximately 84 degrees wide
-
This is an instant 'Plug & Play' sensor via one of the switch sensor channels on the back of any compatible Room Alert ID box
-
Cable distance can be extended from the standard 25' to approximately 900' by using standard speaker wire, twisted pair or any reliable low voltage 2-wire cable.
Room / Door Entry
Room/Door Entry
-
Provides real-time recognition of a door or cabinet being open
-
Standard use is to mount the wired sensor to the frame of a door then, mount the matching actuator opposite of the sensor on the door itself when the door opens, the two components separate and the sensor trips
-
This is an instant 'Plug & Play' door entry alert sensor via one of the switch sensor channels on the back of any compatible Room Alert ID box
-
Cable distance can be extended from the standard 25' to approximately 900' by using standard speaker wire, twisted pair or any reliable low voltage 2-wire cable.
Air Flow
Air Flow (NC/NO)
(NC)
- Provides real-time recognition of air flow stoppage
- This Sensor is normally closed and includes a mounting clip and clamp
- Typical use is for measuring air flow in an HVAC duct, under a raised floor, or near a fan on a rack cabinet or important server.
(NO)
-
Provides real-time recognition of air flow stoppage
-
This Air Flow Sensor is normally open and includes a mounting clip and clamp
-
Typical use is to monitor continuous air flow in an HVAC duct, under a raised floor, or near a fan on a rack cabinet or important server
Panic Buttons
Panic Buttons
-
Designed to be used as an emergency alarm to provide warning where someone is working and may need help or conditions reach an alarm state
-
Palm or foot size, locks in place, pull to release.
-
NEMA rated for weather and industrial use.
-
Compatible with Room Alert 32E/W, 26E/W, 24E, 12E, 11E, 7E, 4E, 3E, 3W, WiSH & WiSPR
Wireless Sensor Hubs
Wireless Sensor Hubs
-
Is a wireless hub that is used exclusively to transmit sensor data from internal and connected sensors back to the Room Alert 32W or 26W environment monitoring hardware unit and WiSPR Sensors
-
Because the WiSH sensor is wireless, it can be located anywhere monitoring is desired up to almost 250' (in the ideal environment) from the main unit without running cables.
Light Towers & More
Light Towers More
-
Designed to enhance the alerting capabilities of the Room Alert 32W, 32E, 12E, 4E or 3E monitors to include visual and audible alarm when an issue or event occurs
-
The visual alarm warning lights and audio alerts can also be turned on or off automatically or manually via the Room Alert web interface, AVTECH's Device ManageR software and SNMP Trap or SNMP Set commands
-
Any Room Alert or Axis camera on the network can enable or disable the lights or audio
-
The light and audio tower does not need to be directly attached to that unit
-
This capability allows the Light Towers to be mounted in any location where the lights are highly visible and trigger from across the network
-
Lights can be activated by alarms detected by sensors connected or by other devices remotely across the network.
Analog Sensors
Analog Sensors
-
Monitors ambient indoor temperature and a connected 0 to 5 VDC analog sensor
-
This compact, light-weight sensor has operating ranges of -40º to 185º Fahrenheit (-40º to 85º Celsius) and 0 to 5 VDC
-
It maintains accuracy within +/- 2º C and +/- 0.075 volts
Relay Switches
Relay Switches
-
Allows low voltage devices to be turned on/off in response to an event going in or out of an alarm condition
-
The Relay Switch Sensor supports up to 4 devices with visible relay status lights
-
Each relay supports loads up to 0.3A at 125VAC or 1A at 24VDC.
Network Cameras
Network Cameras
- Install network cameras anywhere to experience a real-time view of what is actually happening in your computer room, data center or other facility
- Use with AVTECH's Device ManageR software to send snap shot photos with alerts, view real-time video for multiple cameras simultaneously from a single IP address, and incorporate camera sensors
- Use with your Room Alert Account to see snapshots triggered from motion detection from anywhere via your favorite browser
- Take advantage of features that will enhance your physical environment monitoring.
|
 |
 |
 |